This Audax cutter head arrived with a fried coil and a completely crusted armature. The damping material had not aged well.
A complete disassembly, cleanup and reassembly would be required, with the renewal of the damping material and drive coil. This was yet another perfect candidate for our feedback modification.
Neumann cutter heads have a rib along the back, for mounting. Presto lathes, on the other hand, together with the vast majority of non-Neumann vintage lathes (Rek-O-Kut, Fairchild, etc.), have a mount with two slots, for cutter heads with two threaded holes on the back (Audax, Presto, Fairchild, RCA, etc).
Stereophonic cutter heads developed by Neumann are designed to accept a cutting stylus with a conical shank, resembling a micro-miniature version of a Morse Taper, a type of fitting frequently encountered in machine tools, especially metalworking lathes. Vinylium and FloKaSon cutter heads also adopted the same fitting for the sake of compatibility. But most other cutter heads, especially all those predating the stereophonic era, used long, thin cylindrical shanks, often with a flat machined on one side, to allow a set-screw to align the stylus and secure it in place.