Presenting a custom record centering accessory, intended as a very quick and simple way of centering vinyl records with oversize center holes.
This compact and lightweight accessory is simply placed on the center spindle of your turntable over the record and twisted, positioning the sharp edge between the spindle and record hole, taking up any excessive clearance.
The ultimate vacuum platter is finally here, and it is very reasonably priced. After three years of exhaustive research and development and several prototypes of different versions, along with field testing, we have finally arrived at what we believe is the most advanced and accurate vacuum platter ever made.
The Agnew Analog Research and Development laboratory makes a major breakthrough in the fight against the SARS-CoV-2 pandemic!
The Agnew Analog Reference Instrument Type 8001 is a unique electrochemical synthesizer, generating strange sounds through chemical reactions occurring in the built in reactor cell.
The Fairchild line of disk recording lathes, first appearing in the early 1930’s, featured a General Electric hysteresis synchronous AC motor, running at high speed, with a worm and gear reduction to drive the platter. While this system in its various permutations in their different models was impressively well made and performed well for its time (see here for a more detailed description and pictures), a direct-drive system with a floor mounted motor is clearly the way to go if the highest level of performance is to be attained.
In the darkest corner of the catacombs under the lab, illuminated only by glowing directly-heated triode filaments, top secret experimental research is being conducted…
In 2015, J. I. Agnew started developing a high-end cutting amplifier for disk mastering systems, to be used with motional feedback stereophonic cutter heads. During this process, he investigated the design and implementation problems of such transducers in great detail. As usual, he documented his progress, which evolved into an engineering report, titled "An Investigation of Motional Feedback Disk Recording System Design", which was accepted for publication in the November 2018 issue of the Journal of the Audio Engineering Society, following the customary peer review process.
Happy new year! Time to reveal what has been secretly developing in the lab throughout the past year: A stereophonic cutter head of an entirely unique design, invented by J. I. Agnew during his work with experimental transducers for measurement and testing purposes.