For many long years, J. I. Agnew has been examining, adjusting, repairing and replacing bearing systems of all kinds, from disk recording lathes and turntables to tape machines, high precision machine tools, measurement instruments, industrial equipment and all manners of motor vehicles, from passenger cars to heavy trucks. Over the past few years, he has designed and machined countless bearing units to replace worn or damaged units on a diverse range of disk recording lathes and machine tools. Valuable experience was gained, which along with his solid engineering background, was put to good use in improving his designs further and further, up until the current stage of development was reached.
We are excited to announce that we have just finished assembling and testing the first prototype of the Agnew Analog Reference Instruments Type 710 Disk Recording Pre-Emphasis and Cutter Head Protection Module!
The project was founded by Flo Kaufmann, in Switzerland, when he managed to find a pile of these rare beds in the unexplored depth of a warehouse. The plan is to build them up into fully functional disk mastering systems, using newly designed and manufactured parts.
In 2016, Sabine and J. I. Agnew acquired one of these beds, built up and further developed it, into an exceptional quality disk mastering system, which was put to professional service at Magnetic Fidelity.
John Delias, the guitar wizard of the popular rock group "Naxatras", filmed J. I. Agnew while cutting the master lacquer disks, from which the vinyl records of their debut LP were manufactured, at Magnetic Fidelity, and edited the footage to produce this short informative video, offering an insight into this seldom seen, mysterious process.