The Agnew Analog Reference Instrument Type 631 is a high performance direct drive motor, designed for professional disk mastering lathes and turntables. It is usually positioned on the floor under the lathe or turntable, driving the platter directly by means of a long driveshaft, similar to the drive system of the Neumann VMS-70 and several other professional disk mastering systems.
For many long years, J. I. Agnew has been examining, adjusting, repairing and replacing bearing systems of all kinds, from disk recording lathes and turntables to tape machines, high precision machine tools, measurement instruments, industrial equipment and all manners of motor vehicles, from passenger cars to heavy trucks. Over the past few years, he has designed and machined countless bearing units to replace worn or damaged units on a diverse range of disk recording lathes and machine tools. Valuable experience was gained, which along with his solid engineering background, was put to good use in improving his designs further and further, up until the current stage of development was reached.
Finding a Hardinge HLV can be challenging enough, especially if, like us, you happen to be located in Europe. At 1400 lbs, shipping and handling gets complicated. In a previous post, we described the joys of forklifting the beast onto a platform trolley (with suitable structural support added to the building), to get it to the workshop, though narrow corridors and doorways. Once there, it had to be lifted off the trolley and placed directly on the floor. With no chance of being able to drive the period-correct forklift truck into the shop, we had to get creative. A hydraulic engine hoist along with slings and tacks got the job done neatly. With the lathe on the floor and properly leveled, it was time to check it over, replacing, adjusting, lubricating and cleaning parts along the way!
A customer recently imported a vintage Presto 75A disk recording lathe from the USA, with a view to cutting records in Europe.
He quickly discovered, like many people before him, that it was spinning a bit slower than it should, when operated from 50 Hz mains, via a simple step-down transformer. As with most vintage record cutting machines, the platter is powered by a synchronous AC motor, which "locks" to the line frequency.
The need for a new suspension for our recently presented Presto MRC-16 modification project brought about yet another innovation from our R&D laboratory: The Agnew Analog Reference Instrument Type 6021 Lathe Suspension Toolpost!
Inspired by the toolposts used in metalworking lathes and improving upon the cutter head mounting system used by Neumann, the Type 6021 will accurately and rigidly hold any cutter head fitted with a suitable bar, including Neumann, Vinylium and FloKaSon heads, as well as any other head imaginable, through the use of our Series 1400 head mount adapter range.
Presto disk recording lathes are often still in active use nowadays, nearly 80 years after they originally left the factory in New York. Let us have a closer look at what keeps them spinning!
Swiss Precision Engineering: The legendary Schaublin 102 precision lathe with parts of a Simonet lathe in the Agnew Analog laboratory! These pictures are from a 2016 restoration project, documented on the Agnew Analog website. Read the full report here: Schaublin 102 Swiss Precision Lathe Restoration
John Delias, the guitar wizard of the popular rock group "Naxatras", filmed J. I. Agnew while cutting the master lacquer disks, from which the vinyl records of their debut LP were manufactured, at Magnetic Fidelity, and edited the footage to produce this short informative video, offering an insight into this seldom seen, mysterious process.
