After many long years of research and development and long field testing of the various components, we are proud to present the Agnew Analog Reference Instrument Type 612, a brand new disk mastering lathe, now available to order.
We have developed a range of precision machined driveshafts that can be supplied in any length required for your applications, with end diameters to your specification. Each end could be made a different diameter, if required, and we can also supply a useful range of accessories, such as constant velocity flexible couplers, vibration dampers, soft-start clutches and mounting flanges, to suit your application.
For many long years, J. I. Agnew has been examining, adjusting, repairing and replacing bearing systems of all kinds, from disk recording lathes and turntables to tape machines, high precision machine tools, measurement instruments, industrial equipment and all manners of motor vehicles, from passenger cars to heavy trucks. Over the past few years, he has designed and machined countless bearing units to replace worn or damaged units on a diverse range of disk recording lathes and machine tools. Valuable experience was gained, which along with his solid engineering background, was put to good use in improving his designs further and further, up until the current stage of development was reached.
The ultimate vacuum platter is finally here, and it is very reasonably priced. After three years of exhaustive research and development and several prototypes of different versions, along with field testing, we have finally arrived at what we believe is the most advanced and accurate vacuum platter ever made.
Have you ever noticed the total absence of audio equipment from the luxury houses presented in glossy architecture and interior design magazines? It makes the inhabitants of such property come across as rather uncultured.
In fact, not only is an audiophile grade sound system a minimum requirement for the home of anyone affluent enough to hire an interior designer, but it is important to choose a designer who can appreciate the aura of sophistication and intellect projected by a beautifully restored vintage disk recording lathe, set in a handcrafted custom cabinet, in a conspicuous corner of the living room!
We recently had the pleasure of having Symatic over, from Bristol, UK, for a week of training on how to cut (and how not to cut) records.
Symatic runs Cut & Paste Records, a record label attracting some serious attention among skratchers, with high quality releases of skipless skratch samples, lock-groove tones, beats, and relevant music.
In the previous episode, we had a look at taper shank stylus adapters and saw a vintage magnetic monophonic cutter head fitted to the AM44 lathe. The two are not normally compatible. Neumann lathe suspensions do not have the same mount as the suspensions of Presto, Fairchild, RCA and other lathes of the monophonic era, which were originally designed to accept such cutter heads.
But, in fact, almost any cutter head can be fitted to any lathe, as long as there is enough space for it to physically fit, by means of a suitable adapter. The eagle-eyed reader will probably have noticed that the cutter head mount on our prototype AM44 suspension is similar to, but not the same as, the mount used in Neumann suspension boxes. So, the adapter shown here was made specifically for our AM44 suspension unit.
