transformer (8)

A Fashionable Rek-O-Kut Lathe Cabinet

Have you ever noticed the total absence of audio equipment from the luxury houses presented in glossy architecture and interior design magazines? It makes the inhabitants of such property come across as rather uncultured.

In fact, not only is an audiophile grade sound system a minimum requirement for the home of anyone affluent enough to hire an interior designer, but it is important to choose a designer who can appreciate the aura of sophistication and intellect projected by a beautifully restored vintage disk recording lathe, set in a handcrafted custom cabinet, in a conspicuous corner of the living room!

[MISSING TRANSLATION] J. I. Agnew

Hardinge HLV Super-Precision Lathe Restoration: Variable-Speed Drive

All Hardinge HLV and HLV-H variants feature a continuously variable speed drive to the spindle. It starts with a 3-phase, two speed squirrel cage induction motor, rated at 500 rpm and 1500 rpm nominal (less in practice, due to slip) at 50 Hz. This would be 600 rpm and 1800 rpm at 60 Hz.

[MISSING TRANSLATION] J. I. Agnew

Rek-O-Kut Master Pro System with modified Presto 1D Cutter Head

Tasos of Epos Laboratory (a Grado retipping specialist) from the beautiful south of Greece is the lucky owner of this 1950's Rek-O-Kut disk recording system.

It consists of a Rek-O-Kut Model V 16" turntable, which he found in the USA (where else?) as a non-runner. The motor was in bad shape and refused to run at all. Even if it would run, it was expecting to be fed on a regular diet of 110 VAC/60 Hz!

[MISSING TRANSLATION] J. I. Agnew

Presto 75A Restoration Project

A customer recently imported a vintage Presto 75A disk recording lathe from the USA, with a view to cutting records in Europe.

He quickly discovered, like many people before him, that it was spinning a bit slower than it should, when operated from 50 Hz mains, via a simple step-down transformer. As with most vintage record cutting machines, the platter is powered by a synchronous AC motor, which "locks" to the line frequency.

[MISSING TRANSLATION] J. I. Agnew

New Styling for Agnew Analog Transformers

Our popular range of premium transformers and iron-core inductors just got prettier!

No need to hide your transformers!

With powder coated end-bells in Agnew-cream-white and our fancy engraved stainless steel product plates riveted on, with type designation and serial number stamped by hand as a seal of approval following our extensive testing and quality control procedures, our transformers now look as good as they are!

[MISSING TRANSLATION] J. I. Agnew

New Agnew Analog Product Plates

We are very excited to present our new product plates, featuring our new logo, engraved on stainless steel plates!

The new logo was designed by Sabine Agnew and the choice of stainless steel as a material for the plates acts as a further statement of our commitment to exceptional quality, to accompany our products throughout their extremely long service life with no deterioration.

[MISSING TRANSLATION] J. I. Agnew

Precision Transducer Development

This item is the latest addition to our collection of experimental transducer prototypes. What you see is a multi-layer miniature winding on a custom machined former, entirely made in-house at the Agnew Analog Research & Development Laboratory.

 

[MISSING TRANSLATION] J. I. Agnew

Presto MRC-16 Lathe Motor

Presto disk recording lathes are often still in active use nowadays, nearly 80 years after they originally left the factory in New York. Let us have a closer look at what keeps them spinning!

[MISSING TRANSLATION] J. I. Agnew