A good machine spindle is one of the factors defining the accuracy attainable from rotating machinery. This applies equally to machine tools used in industrial manufacturing and to disk recording and mastering lathes, used to make phonograph records.
At Agnew Analog Reference Instruments, we use some of the finest and most accurate industrial manufacturing machine tools ever made, to build some of the finest and most accurate disk recording and mastering equipment ever made, so we have had to learn a thing or three about machine spindles along the way.
For many long years, J. I. Agnew has been examining, adjusting, repairing and replacing bearing systems of all kinds, from disk recording lathes and turntables to tape machines, high precision machine tools, measurement instruments, industrial equipment and all manners of motor vehicles, from passenger cars to heavy trucks. Over the past few years, he has designed and machined countless bearing units to replace worn or damaged units on a diverse range of disk recording lathes and machine tools. Valuable experience was gained, which along with his solid engineering background, was put to good use in improving his designs further and further, up until the current stage of development was reached.
The ultimate vacuum platter is finally here, and it is very reasonably priced. After three years of exhaustive research and development and several prototypes of different versions, along with field testing, we have finally arrived at what we believe is the most advanced and accurate vacuum platter ever made.
Available in 14" and 12" versions, our Type 6114 and Type 6112 Reference Instruments are now available to order, in any quantity. Do you want 100 of them? We'll make them, and threw in a quantity discount as well!
The Agnew Analog Reference Instrument Type 192 is a minimalist, industrial-grade stylus heater supply unit, designed and built to last forever. It is a current-regulated design, set at the factory for 550 mA, in an ultra-ruggedized configuration, for maximum reliability in constant-duty environments, when downtime is not an option.
There is a long history of use of precious stones as industrial materials, from precision bearings to cutting tools, lapping compounds to grinding tools and several other specialised applications.
The recording of phonograph records is essentially a machining operation, performed by means of a machine tool called a disk recording lathe. A special cutting tool is used to cut a continuous spiral groove on the surface of a blank disk. This tool is called a disk recording stylus, or simply cutting stylus. The big difference to other forms of machining is that there is sonic information stored as modulation of the cut groove, which can be reproduced on another special machine, often called turntable or record player, or disk reproduction system.
In the previous episode, we had a look at taper shank stylus adapters and saw a vintage magnetic monophonic cutter head fitted to the AM44 lathe. The two are not normally compatible. Neumann lathe suspensions do not have the same mount as the suspensions of Presto, Fairchild, RCA and other lathes of the monophonic era, which were originally designed to accept such cutter heads.
But, in fact, almost any cutter head can be fitted to any lathe, as long as there is enough space for it to physically fit, by means of a suitable adapter. The eagle-eyed reader will probably have noticed that the cutter head mount on our prototype AM44 suspension is similar to, but not the same as, the mount used in Neumann suspension boxes. So, the adapter shown here was made specifically for our AM44 suspension unit.
